The RangeXTD WiFi Range Extender is the next-generation extender with powerful features. It provides WiFi access to your house so you can easily stream videos and music in HD.

It also provides a speed of up to 300 Mbps of 2.4 GHz and has two powerful antennas. The setup of the extender is easy; press the WPS button, and it starts working.

Once it is connected to your device, enjoy WiFi coverage in every corner of your house. You can connect more than eight devices simultaneously with the help of its hotspot booster.

It helps to connect to your existing wireless device, so you don’t need a new modem, mesh wifi system, or a whole range of extenders and boosters to access the RangeXTD WiFi router for your house. It has a compatible, smooth, and discrete design, making it look better.

Detailed Features of The RangeXTD WiFi Range Extender

The RangeXTD WiFi Range Extender helps to extend the WiFi coverage. It increases the reach of the range all over the house so you can enjoy a lag-free internet connection.

It is mainly designed to improve WiFi coverage, directly affecting the internet’s network speed and helps you access it quickly.

It helps to Eliminate WiFi dead zone.

It helps to eliminate the dead zone areas and buffering in your network speed. It provides around 300 Mbpd of pace that allows connecting multiple devices simultaneously.

It has powerful antennas which are compatible with your old or existing modems. You can use the services of the extender in a hassle-free way.

It helps to boost the WiFi signal.

The RangeXTD WiFi Range Extender helps boost the extender’s WiFi range. You can also take the rangextd test using its app or by visiting its official website.

Sometimes many devices are connected to the extender. That’s why it diminishes the speed of the WiFi extender.

Easy to Set up

It is easy to set up and can easily be managed through the mobile app. Another step for configuring the extender is using the WPS button. But with just a push of a button, you will be ready to access the router.

Smart LED function

The RangeXTD extender has an intelligent LED light function, which indicates the network strength of the WiFi range. An arrow LED starts blinking if the extender is not receiving a good network connection.

So it would be best if you moved your extender to another location. When it shows a yellow LED light, please press the button for 5 seconds until it blinks blue. An Orange LED light means your extender is getting a weak connection.

Add multiple devices in RangeXTD WiFi Range Extender.

It helps to add more than eight RangeXTD wireless extenders simultaneously. You and your family members can enjoy a wireless internet connection.

You can pick this extender and connect more than eight users simultaneously. It does not affect your WiFi speed. Every user will enjoy videos and music without buffering. It works as a three-in-one router, repeater, and access point.

Compatible design

The RangeXTD wireless extender has a portable design that helps to improve the WiFi signal. It helps to reach every corner of the house. 

With its high-speed access of 300 Mbps, it helps to cover multi-level home or office areas. It also enhances signal strength. The extender looks slim and sleek, making it easy to carry.

Default Parameters of RangeXTD Wireless Extender

  1. URL: 192.168.7.234
  2. Login password: admin
  3. Wi-Fi key: no
  4. Wi-Fi SSID: RangeXTD

Configuration of the RangeXTD Wireless Extender

You can configure your rangextd wireless extender by using two methods wirelessly or using an Ethernet cable.

Configuration of the Extender Wirelessly

To begin with, Turn on the power of the extender with the help of a power cable. After that, click on the network icon of your desktop and try to find the RANGEXTD signal from the displayed list. When you find the rangextd network, click on the web and wait for a few seconds.

After that, open any web browser, type 192.168.7.234 rangextd IP address, and wait for a while. After some time, a login page appears on your web screen. Click on that page and fill in the asked details for further process.

A list appears on your screen; select your network SSID name and enter the password details, and you’re ready to access the extender wirelessly.

Configuration of the RangeXTD WiFi Range Extender using cable

Firstly, plug your extender into the power outlet and connect your PC or laptop with an Ethernet cable and follow the process step by step from the manual guide.

Steps To Configure RangeXTD WiFi Repeater Wireless Mode

  1. The mode selector should be set to Repeater for Repeater mode. Connect the unit to a power outlet.
  2. Click the network icon (or) in the lower right corner of the desktop. You will find a signal from RANGEXTD. Click “Connect” and wait a few seconds.
  3. Open a web browser and type 192.168.7.234 in your browser’s address bar. This number is the default IP address for this unit.

Resetting RANGEXTD Repeater

Please check if the device matches the factory default settings if you cannot enter 192.168.7.234. Press and hold the reset button for 10 seconds or until the LED goes out. After resetting the RANGEXTD repeater, disconnect the RANGEXTD repeater for 10 seconds.

Connect it again and wait about 30 seconds, then check your Wi-Fi network for a network named ‘RANGEXTD‘ on your computer or mobile device.

  1. The login screen below will appear. Enter your password, then click “Login”, to log in. The default password is ‘admin‘.
  2. After logging in, you will see a web page below; click “Router / Repeater / AP”.
  3. From the list, select a Wi-Fi SSID. After choosing the Wi-Fi SSID, you must enter the password for your wireless router.

After completing the entry, click “Apply“.

After restarting, go to your device’s WLAN settings, and connect to the new Wi-Fi SSID.

Set up Wi-Fi repeater mode using the RJ45 cable

Connect the device to a power outlet. Connect your computer/laptop to the device using the RJ45 cable.

  1. Follow processes A3 through A6 to set up the device.
  2. Setting up Wi-Fi hotspot mode.

Use AP mode to get a “wireless access point.” In this mode, wireless end devices will connect to the Device. For example, you can also use this mode to make a previously unsupported router wirelessly enabled.

  1. The mode selector should be set to Access Point and AP mode.
  2. Plug the device into an outlet.
  3. Follow the process from Step2 to Step5.

Read More- Remarkable Strategies about Amplifi Wireless Router

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *